Comparing mobile C-arm systems for healthcare procurement should begin with the procedures the facility actually performs, not with the longest feature list. A 2026 buyer's guide from Quest Imaging Solutions states the principle directly: choose the system that fits the procedure rather than the system with the most features [1]. That guidance matters because two systems can appear similar on a specification sheet while differing substantially in detector technology, generator capacity, orbital movement, and workflow automation. Procurement teams should therefore build a comparison around clinical requirements, technical decision points, documented evidence, and total delivered cost. This article explains that workflow and applies it to a concrete evaluation example using current vendor documentation and a June 2026 request for proposal from a critical access hospital [3].

Start with the procedure, not the product

The first comparison step is to identify the primary specialties, patient size range, required imaging field of view, and positioning needs. Quest Imaging Solutions recommends asking whether pulse rates, frame rates, or advanced vascular applications are clinically required before evaluating any system [1]. A pain management practice that performs mostly fluoroscopy-guided injections has different requirements from a trauma service that needs high-power acquisitions for large patients. The June 2026 RFP from Snoqualmie Valley Health illustrates this procedure-first approach by listing podiatry procedures among the intended uses and specifying digital image acquisition, low-dose imaging modes, image enhancement, DICOM export, and PACS integration options as technical requirements [3].

The same RFP shows how procurement documents can force vendors to respond to a common configuration. It asks for proposed equipment configuration, new versus refurbished options, detailed pricing structure, warranty and service information, implementation timeline, training approach, cleaning requirements, references, and product lifecycle roadmap [3]. Quest Imaging Solutions warns that comparing different option packages can make one system look less expensive simply because important accessories or software are missing from the quote [1]. A comparison matrix should therefore list the same basic configuration for every vendor, including detector type, generator, tube, software version, included accessories, warranty, and service support [1].

Detector and generator decisions shape clinical range

Detector technology is a primary technical decision point. Siemens Healthineers documents the Cios Alpha.neo with a Retina Imaging Chain using either IGZO or CMOS flat detector technology, with field of view options of 30 x 30 cm for IGZO and 21 x 21 cm or 30 x 30 cm for CMOS [4]. The same source lists peak power of 25 kW or 12 kW, orbital movement of 148 degrees, and free space of 84 cm [4]. Philips documents the Zenition series with maximum X-ray generator power ranging from 2.1 kW, 1 or 4 kW, to 15 kW or 25 kW depending on model, and detector areas of 20 x 20 cm, 21 x 21 cm, or 30 x 30 cm [7].

These specifications are not interchangeable. A larger field of view can reduce the number of repositioning steps during a procedure, while higher generator power supports longer or more demanding acquisitions. Siemens states that the Cios Alpha.neo combines the Retina Imaging Chain with a high-power generator and dedicated cooling for extended endovascular procedures [4]. The company also documents an Energy Storage Unit that buffers energy to increase maximum power and triples the mean power for acquisitions lasting up to 30 seconds [4]. Procurement teams should map these specifications to the procedure list rather than treating higher numbers as automatically better for every setting.

A concrete evaluation example

Consider a hypothetical critical access hospital comparing a Cios Alpha.neo and a CIARTIC Move for a new operating room. The procedure list includes orthopedic trauma, basic vascular work, and pain management. The evaluation team would first confirm that both systems meet the required field of view and generator power for the largest expected patient. For the Cios Alpha.neo, the documented options are 21 x 21 cm or 30 x 30 cm detector areas and 25 kW or 12 kW peak power [4]. For the CIARTIC Move, the documented configuration is a 12 x 12 inch CMOS flat detector, 25 kW peak power, and 200 degrees of orbital movement [8]. The team would then compare movement geometry against the planned table and room layout, using the free space and immersion depth figures from each vendor's technical documentation [4][8]. Finally, the team would request identical commercial quotes including training, service response times, loaner availability, and lifecycle roadmap, following the structure in the Snoqualmie Valley Health RFP [3]. This example is a suggested workflow, not a tested procurement outcome.

Movement geometry and workflow automation

Movement geometry affects whether a system can be positioned around the operating table and patient. Siemens documents the CIARTIC Move with orbital movement of 200 degrees, immersion depth of 72.6 cm, and free space of 92.4 cm [8]. The Cios Alpha.neo has orbital movement of 148 degrees and free space of 84 cm [4]. These differences can determine whether a system fits a particular table configuration or supports the angulation required for a given procedure. Quest Imaging Solutions includes orbital movement, vertical travel, angulation, rotation, brakes, steering, positioning, and storage in its evaluation checklist [1].

Workflow automation is a separate comparison category. Siemens describes the CIARTIC Move as a robotic, self-driving mobile 2D and 3D C-arm with a fully motorized chassis and holonomic wheels [8]. Documented automation features include Position Assist, which stores up to 12 procedure-specific positions, Park Assist, and ISO Assist [8]. A preclinical study cited by Siemens confirmed intraoperative-imaging time savings of up to 55% in pelvic surgery and reported that a single person could operate the system independently from inside the sterile field [6]. Procurement teams should ask whether these automation claims are relevant to their staffing model and procedure volume, and request the underlying study rather than accepting the summary figure.

Ergonomic evidence and staff workload

A January-February 2026 study in Radiologic Technology compared the self-driving CIARTIC Move with the standard Cios Spin in a simulated clinical environment [5]. Eight participants transported equipment and performed positioning tasks while sensors collected range of motion and whole-body vibration data [5]. The study reported that the CIARTIC Move reduced flexion-extension range of motion by 48% in younger women, with statistically significant reductions also observed in younger participants, women, and men [5]. Whole-body vibration accelerations decreased by 12% to 45% among axes compared with the Cios Spin [5].

The study authors concluded that the self-driving C-arm might help reduce musculoskeletal disorder risks in radiologic technologists [5]. This evidence is specific to a simulated environment with eight participants, and the study was published in a journal of the American Society of Radiologic Technologists [5]. Procurement teams evaluating ergonomic claims should note the sample size and simulation setting. The finding does not establish clinical outcomes or productivity gains in a live operating room. It does provide a documented basis for asking vendors about motorized transport, brake control, and table-side control options when staff injury risk is a procurement priority.

Total cost of ownership and supportability

Total cost of ownership extends beyond the equipment price. Quest Imaging Solutions lists shipping, installation, testing and acceptance, table, accessories, training, service and warranty, taxes and fees, and total delivered cost as part of the final commercial review [1]. The Snoqualmie Valley Health RFP adds preventive maintenance options, service response times, loaner equipment availability, and remote diagnostics capabilities to the required vendor response [3]. Refurbished systems are considered only if vendors can demonstrate OEM-certified or equivalent refurbishment standards, full preventive maintenance documentation, warranty coverage comparable to new equipment, replacement parts availability, and remaining lifecycle expectations [3].

Supportability also includes software and firmware. The RFP asks for product lifecycle and upgrade roadmap information [3]. Siemens documents DICOM 3.0 services, data transfer via LAN, WLAN, USB, or DVD, and image storage of 300,000 images for the CIARTIC Move [8]. Philips describes the Zenition series as designed to reduce operating costs, simplify use, and make fleet management more consistent, with the same control and handling across the series [7]. Procurement teams should verify these supportability claims against the vendor's actual service contract, response time commitments, and parts availability for the specific configuration quoted.