Procurement teams comparing surgical instrument tracking systems should treat the purchase as a workflow decision, not a feature-count exercise. The primary documents show two mature systems with different technical paths: STERIS SPM, which the Department of Veterans Affairs describes as a barcode-based sterile processing asset management system, and Censis CensiTrac, which its manufacturer describes as instrument-level traceability software with optional individual marking tiers. A defensible evaluation starts by separating verifiable system behavior from marketing assertions, then weighting decision points against the specific decontamination, assembly, sterilization and operating room handoffs the facility actually runs. The following comparison organizes the evidence around marking methods, interfaces, conversion and documentation obligations, with concrete procurement questions from current solicitations.

Marking method determines what can be traced

The VA Technical Reference Model entry for SPM describes barcode technology used to track the location and movement of instrument sets from prep and pack through sterilization, dispatch and surgery [1]. This is tray-level visibility for the Desktop Edition covered by that TRM record, with the entry explicitly excluding mobile versions [1]. A purchaser reading only the VA description may not see individual-instrument capability, although STERIS separately documents a supplemental Instrument Tracking Module that it says is scalable and compatible with KeyDots, electro-chemical etching and laser marking [3]. Procurement teams should therefore ask vendors to distinguish base bundle coverage from optional modules in writing, because the two documents describe different scopes for the same product line.

CensiTrac is presented by Censis as supporting case-level cart and container tracking plus individual marked instruments on an Advanced tier [4]. The company states that the capability table is its own comparison and includes a row for individual-instrument tracking to the patient, marked against a 'Typical Tracking System' rather than any named competitor [4]. A 2017 Veterans Health Administration performance work statement describes CensiTrac as an instrument and reusable medical equipment tracking solution developed by Censis, and requires supplementary dot or tape marking where instruments cannot support direct engraving without violating the passivation layer [6]. That document also records a VHA workgroup finding that 100% instrument marking is not currently achievable because of curved, knurled or titanium surface characteristics, a physical limit that applies to any marking-dependent system [6].

Sterilization and equipment interfaces are procurement differentiators

The VA TRM entry states that SPM provides sterilization quality assurance and stores data in a Microsoft SQL Server database, with users responsible for FIPS and NIST compliance under VA policies [1]. The same record has not been assessed by the Section 508 Office, placing accessibility review responsibility on the implementer [1]. This is procurement-relevant because it shifts part of the technical risk to the buyer. STERIS documents washer interfaces that build loads, record process challenge results, document cycle selection, and link washer cycle efficacy results back to trays [3]. A buyer should ask whether these interfaces are certified for the exact washer and sterilizer models on site, because vendor documentation describes the capability but not model-level compatibility.

Censis markets CensiTrac as aligning to AAMI ST79 and ST90, retaining sterilization records beyond the seven-year requirement and tracking competencies to flag expirations [4]. It also claims vendor-agnostic device interfaces including competitors' equipment, with a table marking typical systems as limited in that area [4]. The Ohio State University Wexner Medical Center FY27 request for quotation asks for an instrument tracking solution with bi-directional integration to SQ.track using secure APIs, barcode or RFID workflows across all processing steps, role-based access, audit logs, and management of missing, damaged, repaired and loaner instruments [7]. That RFQ demonstrates how a health system converts vendor claims into explicit minimum requirements, and procurement teams should mimic the structure instead of accepting a brochure table.

Suggested comparison matrix for your facility

An evaluation matrix could assign weighted scores to base scope, instrument marking coverage with documented exceptions, equipment interfaces in writing, conversion labor, server options, reporting and audit retention. For example, if a facility's installed sterilizers are not covered by either vendor's documented washer interface, that gap should outweigh a reporting dashboard claim. If a facility's specialty instruments are largely titanium or knurled, the documented 100% marking limitation [6] should reduce the expected value of an individual-instrument tier. If the financing model favors no on-premise server, the CensiTrac claim of cloud SaaS without an on-premise server [4] should be tested against IT architecture, while SPM's SQL Server database and virtual server support [1][3] should be evaluated against the same constraint. The matrix should leave an explicit 'unverified' column for claims neither vendor supports with primary documentation, such as quantified cost savings or error-rate reductions attributable to the purchased system.

Data conversion and implementation shape total cost

STERIS states that its implementation team can use a data extract from a current tracking system to reduce conversion time, and that a data entry service includes cleaning existing data to reduce duplicates and errors [3]. Instrument names can be reworded to a standard naming convention within SPM [3]. The company also confirms support for virtual servers and separate shared database servers, and says existing workstation computers can be used if they meet SPM specifications [3]. These answers matter because they directly affect infrastructure cost and the labor required to make legacy count sheets usable, which procurement should weigh separately from the software license.

Censis states that switching is usually lower-friction than expected, with reuse of existing computers, scanners and some labels, and a dedicated Implementation Manager running the project in phases [4]. The company says departments typically switch when their current system cannot handle a need such as loaner or peel-pack workflows [4]. Neither vendor publishes a conversion price in the reviewed documents, and neither statement is independently verified. A procurement team should request a fixed-scope data conversion statement of work with acceptance criteria and a documented exception list for instruments that cannot be marked, rather than relying on either vendor's narrative description of smooth conversion.

Evidence for outcomes remains narrower than marketing suggests

A 2022 JAMIA Open study reports an automated RFID system for recording intraoperative surgical instrument use across 15 breast surgeries, 10 carpometacarpal arthroplasties and 4 craniotomies [2]. The authors describe earlier systems requiring manual scanning or Mayo stand monitoring and identify the Mayo stand as a poor proxy for actual use [2]. The systematic review by Fayad et al. summarizes traceability studies using 13.56 MHz and 915 MHz RFID, including deployments at Shimane University Hospital, Japanese Red Cross Wakayama Medical Center, Davis Ambulatory Surgical Center and Duke University Hospital [5]. The same table lists a Haukeland University Hospital study as using microscopic image of fingerprint technology rather than RFID [5]. These studies evaluate research systems, not the commercial SPM or CensiTrac products under comparison, so procurement teams cannot use them as direct head-to-head outcome evidence for either vendor.

A 2025 case report from a Taiwanese central sterilization department describes a UDI barcode system implemented in March 2023, with 157,614 instrument sets equipped over twelve months and self-reported zero-error rate in rapid instrument identification [8]. The authors report 4,026 high-temperature and 380 low-temperature hydrogen peroxide plasma sterilization monitoring cycles recorded, 85,899 packages dispensed and linked to patient record numbers, and 4,406 A4 sheets saved by removing paper documentation [8]. These are single-site descriptive results with no control group and no comparison product, and the abstract does not name the tracking software. Procurement should treat them as proof that barcode-based UDI tracking can be deployed at scale, not as evidence that one commercial system outperforms another.

A concrete evaluation worksheet for procurement

Procurement teams can build a two-system comparison by forcing both vendors to answer the same source-grounded questions. First, request a written confirmation of tray-level versus individual-instrument scope in the base quote, and require the vendor to identify which instruments in the facility inventory are expected to fail marking due to surface characteristics. The 2017 VHA PWS requires a 2D matrix mark scannable by the CensiTrac system within three seconds and prohibits engraving that violates the protective passivation layer [6]. The same standard can be used as a vendor-neutral acceptance criterion: specify that any direct mark must preserve the passivation layer and that supplementary tape or dot methods must be validated for the facility's sterilization modalities [6].

Second, require both vendors to map their interfaces to the installed base of washers, sterilizers and scheduling systems, including whether the OR scheduling interface supports case-specific pick lists without transferring protected health information. Censis describes such an interface in its documentation [4], while STERIS documents washer interfaces and cycle efficacy linkage [3]. Third, request a fixed-phase conversion plan with data cleaning rules, because STERIS documents data cleaning as part of implementation [3]. Finally, require record retention and audit-trail demonstrations against the seven-year sterilization record language used by Censis [4] and the VA's security and privacy policy obligations [1]. The vendor that can document these elements in the quote, rather than in a brochure, is the one procurement can evaluate.