Reagent inventory and lot tracking in a LIMS depends on which records the system owns, who can change them, and how lots move from pending to active to archived. Clarity LIMS treats reagent kits and lots as configuration objects tied to specific steps, with status controlled by permissions and expiry dates [1]. SampleManager describes reagents as stock types that can carry lot number, storage location, hazard, available amount, ordering, and supplier fields [2]. A custom Lockbox-based portal adds client-facing requisitions and retest dates for critical reagents [3]. These are not interchangeable implementations. The practical question is whether a lab needs step-level lot selection, workflow-level stock consumption, or external visibility into reagent status. Each documented system answers that question differently, and the differences affect validation, data ownership, and the effort required to correct a bad lot record.
Record ownership and status boundaries
Clarity LIMS makes reagent kits and lots configuration records. All logged-in users can open the Reagents configuration screen, but the Administrator role holds the Configuration:update permission by default, so ordinary lab users cannot add or modify kits [1]. A new lot is saved as Pending by default, meaning it has been ordered but not received and is not available for selection during step work [1]. Active lots can be selected when scientists record work, while Archived lots are typically expired or used up and are automatically archived when the expiry date passes [1]. This creates a clear boundary between configuration ownership and operational use.
The deletion rule reinforces that boundary. Only reagent kits and lots that have not been used in a step can be deleted [1]. Once a lot is attached to recorded work, it becomes part of the experimental record and cannot simply be removed. That constraint matters for laboratories that need to correct a mistaken lot entry. The documentation does not describe a merge or reassignment path for used lots, so the available correction is likely limited to status changes or new records. A lab evaluating Clarity LIMS should confirm how it handles a lot entered on the wrong step before relying on deletion as a cleanup mechanism.
Stock management versus step-level lot selection
SampleManager LIMS takes a different approach. Thermo Fisher Scientific states that reagents, standards, and other consumables can be managed as different types of stock with information such as lot number for each stock batch, label, storage location, hazard, available amount, ordering, supplier, and parameters for use in calculations [2]. A new batch of stock is created once it is received in the lab [2]. The specified or calculated date or event wording in the source concerns retention-period actions, not stock-batch creation [2]. This positions reagent tracking inside a broader stock and inventory model rather than as a step configuration object. The FAQ also says reagent inventory management provides visibility of laboratory consumables such as solvents, reagents, and disposables [2].
The distinction is not cosmetic. In Clarity LIMS, the reagent kit is enabled on specific steps, and the kit/step configuration is bidirectional: a kit can be enabled from the Reagents screen or from a master step or step [1]. That ties lot selection to protocol execution. In SampleManager, the documented emphasis is on stock batches, receipt, and workflow attribution for quality assurance [2]. A lab that needs to know which lot was used on which sample may find either model workable, but the configuration effort differs. The source material does not provide a side-by-side feature matrix, so a direct functional comparison of step-level enforcement remains unresolved.
A hypothetical validation scenario for lot correction
A useful demonstration would configure a Clarity LIMS step with a required reagent kit, run a sample using lot A, then attempt to delete lot A. The expected result is that deletion fails because the lot has been used in a step [1]. The tester would then archive lot A and add lot B as Active, confirming that lab users can select only lot B on subsequent runs [1]. A second test would run the AccessionReagentKitLots script twice with the same lot name and lot number but different kit names, verifying that the second run fails on the name-plus-number uniqueness check [5]. This scenario is a suggestion for validation planning, not a report of independent testing.
Automation and accessioning boundaries
Clarity LIMS documents a specific automation path for reagent lots. The AccessionReagentKitLots script in the NGS Extensions Package creates a new reagent lot based on container names [5]. It sets the lot name from a lotName parameter, the lot number from the container name, the expiry date from an expiryDays parameter, and the status to Active [5]. Before accessioning, the script verifies that expiryDays is a whole number greater than zero and that the lot does not already exist [5]. The uniqueness check uses the combination of lot name and lot number, not the kit name [5].
That validation rule has a documented consequence. The script can create lot ABC with number 123 and lot ABD with number 123 because the kit name is not checked during validation [5]. The script also supports only the outputContainer value for the from parameter when step outputs are samples; step output measurement records with placement are not supported [5]. These constraints are specific to the documented script and should not be read as general Clarity LIMS behavior. A lab planning automated lot accessioning should test whether its container naming conventions can produce duplicate lot numbers across kits, because the script will not prevent that outcome.
Client-facing critical reagent tracking
A published special report describes a different use case: B2S Life Sciences built a critical reagent inventory system on Lockbox LIMS from Third Wave Analytics and added a custom web portal called LCM+ Portal [3]. The authors state that Lockbox provided incoming sample traceability and storage location and condition tracking, while Third Wave configured additional features including internal requisitions and shipped material tracking [3]. The portal gives controlled user access to projects, samples, and requisitions, with project managers authorized to perform critical reagent approvals [3].
The data model is more expansive than a simple lot table. For each reagent, the database stores retest or expiration date, manufacture date, volume, concentration, location, status, percentage of available samples, lot number, and catalog number, with full audit log capability [3]. Requisitions represent internal and external movement of samples and can be generated by a sponsor or CRO partner [3]. This is a client-service orientation rather than an internal lab stock ledger. The report describes one organization's customized implementation, not a standard product feature, so its applicability to other labs depends on whether external visibility and requisition tracking are actual requirements.
What the documentation does not establish
Several vendor pages describe capabilities in general terms without specifying the underlying record model. Sapio Sciences says its laboratory inventory management software supports receiving and registering stock, managing expiration, waste, and disposal, monitoring stock levels, and automating reordering [4]. LabKey states that its LIMS can track expiration dates, storage capacity, remaining quantity, and usage, and that barcode scanning automatically updates inventory records [7]. These are vendor claims about their own products and should be attributed as such. Neither page provides the same level of procedural detail as the Clarity LIMS reference guide or the B2S report.
The EPA microbiology laboratory SOP offers a contrasting manual control-number scheme. It describes OMLIMS, a Microsoft Access database stored on a shared drive, used to assign control numbers such as R112022E123125-01, where the suffix counts items received on the same date [6]. The SOP recommends limiting database access to one or two staff members and generating a report of supplies expiring within 30 days [6]. This is a documented procedure for one government laboratory, not a commercial LIMS benchmark. It illustrates that lot tracking can be satisfied with a controlled spreadsheet-like system when the lab's scale and regulatory setting permit it.
Sources & references
- Reagents · help.claritylims.illumina.com
- SampleManager LIMS™ Software - FAQs · www.thermofisher.com
- Full article: Critical Reagent Inventory Management System and Web Portal Specifically Optimized for Supporting External Clients · www.tandfonline.com
- Laboratory Inventory Management Software | Sapio Sciences · www.sapiosciences.com
- Accession Kit Lots · help.connected.illumina.com
- ATMP - QC-09-09 Establishment of Control Numbers and Tracking of Laboratory Supplies · www.epa.gov
- LIMS Inventory Management | LabKey LIMS · www.labkey.com