MedtechLedger currently links 4 FDA records to the applicant name Abbott. It includes 1 original PMA approval. 3 entries are 30-day notices. These are records held by this publication, rather than a count of the company’s entire portfolio.
The dated entries run from Dec 6, 2019 to Oct 30, 2026. Individual filings may concern different products or changes to an existing application; review the identifier and decision scope on each record.
Changes described in PMA records
FDA posted a 30-day notice for supplement S034 to PMA P170038 for the CentriMag Circulatory Support System. The stated decision scope is a manufacturing process change to the routine bioburden monitoring program for the CentriMag Blood Pump. The supplement type is listed as Process Change - Manufacturer/Sterilizer/Packager/Supplier, and the decision is recorded as OK30.
This notice does not represent a new approval of the entire system or a change in indication. The source statement identifies only the bioburden monitoring program change; it does not describe the specific monitoring method, acceptance criteria, or manufacturing site affected. No safety or effectiveness conclusion is provided in the source fields.
FDA approval-order wording
a manufacturing process change to the routine bioburden monitoring program for the CentriMag Blood Pump
Oct 30, 2026 · 30-Day NoticeThe FDA database entry P170038/S033 records a 30-day notice for Abbott's CentriMag Circulatory Support System, classified under product code DSQ for ventricular assist bypass in cardiovascular devices. The reported change is the addition of "an additional second-tier supplier of the CentriMag Motor Protection Cup component," with the supplement reason labeled as a process change covering manufacturer, sterilizer, packager, or supplier. This describes a supply-chain arrangement for one named component, not a modification to the device's approved design or labeling.
Because S033 is a supplement to PMA P170038, it sits within that original approval rather than constituting a new approval of the CentriMag system as a whole. The source statement gives the component and the supplier tier but does not name the supplier, describe qualification testing, or present data bearing on safety or clinical effectiveness; the notice's purpose is regulatory reporting of the change, and should not be read as independent confirmation of either.
FDA approval-order wording
an additional second-tier supplier of the CentriMag Motor Protection Cup component
Oct 2, 2026 · 30-Day NoticeThe FDA record for P170038/S032 describes a 30-day notice under the CentriMag Circulatory Support System PMA, with the stated purpose of replacing existing wave soldering equipment with new wave soldering equipment. The listed supplement reason is a process change involving a manufacturer, sterilizer, packager, or supplier. The device category is ventricular (assist) bypass, specialty cardiovascular, product code DSQ, applicant Abbott.
The identifier establishes this as a supplement to PMA P170038 rather than a new approval of the whole system, and it is a manufacturing notice rather than an original PMA. The statement does not name the affected facility, equipment model, process controls, or validation data, and it does not say whether soldering affects a patient-contacting component. The reported purpose is not evidence of safety or clinical effectiveness, and the record gives no basis for a new indication or clinical use.
FDA approval-order wording
replacement of the existing wave soldering equipment with new wave soldering equipment
Sep 2, 2026 · 30-Day NoticeFDA’s recorded scope: Approval for temporary circulatory support for up to 30 days for one or both sides of the heart to treat postcardiotomy patients who fail to wean from cardiopulmonary bypass, providing a bridge to decision when it is unclear whether the patient's heart will recover or whether the patient will need alternative, longer-term therapy.
Dec 6, 2019Subsidiaries and similarly named applicants can have separate records. The links below preserve the applicant and submission identifiers. Source records are linked on each filing.