Hangzhou SHINING3D Dental Technology Co., Ltd. appears in FDA device records as the applicant for dental submissions reviewed through the Center for Devices and Radiological Health. The company name is tied to a sequential aligner system and to a temporary crown and bridge resin, both filed as traditional 510(k) premarket notifications with third-party review. The filings place the applicant in Hangzhou, China, and route correspondence through Third Party Review Group, LLC. The name resembles the SHINING 3D brand described on shining3d.com, but the available records do not establish a legal relationship between the two entities, so the applicant is treated here as the named FDA submitter. [1][2][7][9]
Clear aligner clearance K263860
The Shining3D Clear Aligner System received a substantially equivalent decision on October 30, 2026, under 510(k) number K263860, with the application received the prior day. FDA records classify it under 21 CFR 872.5470, product code NXC, device class 2, with the dental advisory committee and a sequential aligner device name. The clearance was a traditional 510(k) with third-party review indicated, and the record notes a summary rather than a statement. The applicant address in the record is 9-5-2, Tri-River Valley, Wenyan St., Xiaoshan, Hangzhou, with contact Chen Yuting. [1][4]
The FDA decision letter for K263860 is addressed to the applicant in care of Dave Yungvirt at Third Party Review Group, LLC in Henderson, Nevada, and lists the trade name, regulation number, product code and class. The letter also references testing against a standard for orthodontic base polymers, stating that results demonstrate the device meets the property requirements of the referenced standard. That statement describes conformance testing in the filing, not clinical performance. [2]
Dura-Arch resin filing K261261
A separate submission, K261261, covers a device named Dura-Arch under 21 CFR 872.3770, temporary crown and bridge resin, product code EBG and PZY, class II, dental review panel. The FDA letter is dated April 17, 2026, with the application dated and received April 16, 2026, and is addressed to the same applicant in care of Dave Yungvirt, then listed as CEO of Third Party Review Group, LLC at an address in Madison, New Jersey. The filing identifies Pro3dure Medical GmbH's GR-17 Resin System, K201827, as the predicate device. [7]
How the filings sit in the record set
The linked FDA collection for this applicant contains one 510(k) record, K263860, and its decision count shows one substantially equivalent outcome. That count reflects the linked filings at the time of retrieval, not the company's total regulatory history, sales or safety record. The single record sample is the same K263860 entry, so the sample and collection counts coincide here without implying anything about filings outside the linked set. [1]
Other clear aligner clearances under product code NXC appear in third-party indexes, including the Spark Clear Aligner System, the LuxCreo Clear Aligner System and the MEM Clear Aligner System, each with a different applicant. These entries show the product code is shared across manufacturers and do not describe this applicant's devices. FDA's public page on clear dental aligners describes them as a series of custom-made, removable plastic trays, a general definition rather than a statement about K263860. [4][8]
Applicant identity and the SHINING 3D name
The manufacturer's own about page states that SHINING 3D has developed 3D scanning hardware and software since 2004, with work spanning industrial metrology and digital dentistry, and lists a Hangzhou office at No. 1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang. That page describes the brand and its offices; it does not name Hangzhou SHINING3D Dental Technology Co., Ltd. as a subsidiary or affiliate. The FDA filing address is a regulatory contact location and is not treated here as a headquarters. [9]




