MK Medical GmbH appears in FDA records as the applicant on a traditional 510(k) premarket notification for Cerclage Wires; K-wires; Steinmann Pins, filed under product code HTY and regulation number 21 CFR 888.3040 for smooth or threaded metallic bone fixation fasteners in Class II. The FDA record lists the applicant at Jahnstraße 14, Emmingen-Liptingen, Germany, and the clearance letter addresses the submission through a regulatory affairs contact at Medagent GmbH in Mühlheim an der Donau. The manufacturer’s own published documentation describes a product program built around Kirschner wires, Steinmann pins, pins, and sterilization containers with storage racks and accessories. [1][2][3][4]

The K262126 clearance and its scope

FDA record K262126 shows a traditional 510(k) received on June 24, 2026, and decided on October 22, 2026, with decision code SESE and the description Substantially Equivalent. The advisory committee is listed as orthopedic, the third-party flag is N, and the statement or summary field indicates a Summary. The device name in the record is Cerclage Wires; K-wires; Steinmann Pins, and the openFDA device name is Pin, Fixation, Smooth. [1]

The clearance letter for K262126 names the trade or device as Cerclage Wires; K-wires; Steinmann Pins and gives regulation number 21 CFR 888.3040, regulation name Smooth or threaded metallic bone fixation fastener, regulatory class Class II, and product codes HTY, JDW and JDQ. The letter is dated October 22, 2026, and records the submission as dated and received June 24, 2026. [2]

The 510(k) summary document carries the same K262126 identifier and the title Cerclage wires, K-wires & Steinmann Pins 510(K) Premarket Notification. Its biocompatibility discussion refers to manufacturing and finishing processes, cleaning, sterilization, packaging, biological test results, analytical cleanliness data, particulate assessment, clinical history of the materials, and risk management documentation, and states that the assessment did not identify new biological hazards that would change the biocompatibility profile of the finished device. [2]

Documented wire and pin products

The manufacturer’s Kirschner wire page describes Kirschner wires and Kirschner drill wires and states that the company produces Kirschner drill wires rather than only grinding wires. The same page lists Steinmann Pins, Pins, and Sterilization Containers & Storage Racks among MK products, and gives a contact address at Jahnstraße 14, 78576 Emmingen-Liptingen, with telephone and fax numbers and an incident email address. [3]

The product catalog presents the delivery program as Kirschner Wires & Steinmann Pins, with sections for Kirschner Wires, Titanium Kirschner Wires, Steinmann Pins, Sterilization Containers, Sterilization Containers for Kirschner Wires, and a Caliper for Kirschner Wires. It also lists container lid lengths from 200 mm to 550 mm under item numbers such as MK-1920 and MK-1955, and notes that other lengths are available on request. [4]

The Steinmann nails page states that Steinmann nails from MK medical are used primarily in traumatology to stabilize, and that the implants are offered for bone fractures and other orthopedic challenges. The page lists Steinmann Pins among MK products alongside Kirschner drill wires, Pins, and Sterilization Containers & Storage Racks. [6]

Instructions for use and quality documentation

The non-sterile Kirschner drill wire instructions for use, revision 05 dated 10.08.2026, state that the wires are available in various lengths, diameters and tip shapes such as trocar, round, flat and lancet, with special designs including thread variants, knurls, eyelets or drill tips. The item number format KBddlllxxxx is described as Kirschner Drill Wires made of implant steel, with stainless steel given as the material. [5]

A Summary of Safety and Clinical Performance for TD-01 / TD-02, Orthopedic implants / Steinmann pin, identifies the device risk class as IIb and the manufacturer under Regulation (EU) 2017/745 as MK medical GmbH & Co. KG at Jahnstraße 14, Emmingen-Liptingen. The document is issue dated 01.09.2026, revision 5, and its revision history records a change of Chapter 3.6 in accordance with the revision of the technical file. [7]

What the filing record does and does not establish

The FDA record and clearance letter identify MK Medical GmbH as the applicant for K262126 and route correspondence through Medagent GmbH as regulatory affairs contact. The SSCP names MK medical GmbH & Co. KG as manufacturer under EU Regulation 2017/745, and the relationship between these two named entities is not explained in the available documents. No parent company, ownership structure, customer list or commercial availability outside the cited documents is established here. [1][2][7]